Liebherr cranes AutoCAD DWG blocks

My collection of AutoCAD blocks of several Liebherr cranes(both standard and narrow crane) that we use in our project.

Hope you can find them useful. More cranes here: Terex/Demag cranes and Manitowoc cranes AutoCAD DWG blocks.

 

Liebherr LTM 1090 crane autoCAD block

Liebherr LTM 1130 crane autoCAD block

Liebherr LTM 1350 crane autoCAD block

Liebherr LR 1400 crane autoCAD block

Liebherr LR 1400 2W narrow crane autoCAD block

Liebherr LTM 1500 8.1 crane autoCAD block

Liebherr 1600 W narrow track autoCAD block

Liebherr 1750 crane AutoCAD block

Liebherr LTM 11200 - 9.1 crane AutoCAD block

Liebherr LR 11350 crane AutoCAD DWG Block

Liebherr LR 1750

 

Narrow track cranes

In wind farms construction at least 2 cranes are needed: a main crane to lift component such as tower segments, blades and rotor and a smaller, auxiliary crane that help the main crane during the lift operations and can be used also with steel rebars, embedded rings or anchor cages and so on.

Basically there are 2 main types of main cranes: standard track and narrow track cranes.

Standard track cranes needs around 10 meters, depending on the model, to move on access roads. For this reason, due to the increasing number of wind farms in areas with environmental problems or in mountainous regions narrow track cranes are a winning option – they need only 6 meters, and can help save money in civil works and in dismantling, transportation and subsequent re-erection of the crane.

Terex-Demag CC 2800 is one of the available models, while an alternative is the Liebherr LR1600/2. They can move with a mounted boom, on a gradient around 10ΒΊ.

When they are in an open position on the crane pad, ready for lifting, they can occupy even more space of a normal crane – they need around 14 meters.

Both cranes are designed especially to hoist 75-100 tonne gondolas up to hub heights of between 90 and 130 meters above ground level.